PACK 100

<heading-style-h2>PACK 100 <heading-style-h2>

<heading-style-h6>Anchoring ziplines under 100 meters and long games. <heading-style-h6>

<heading-style-h3>Assembly procedure <heading-style-h3>

1. Check the condition of the anchor support and the cable.
2. Install the strap around the tree with the shackle, or cut the cable and place the cable and the cable directly into the anchor hole of the Pack by positioning it ideally on the slice.Position the 12 mm lifeline cable inside the aluminum matrix using the 8 bolts.Tighten to a tightening torque of 50 Nm.

<heading-style-h3>Installation advice <heading-style-h3>

The cable at the exit of the matrix is oriented downwards so as to allow a smooth passage of the safety hook on the plates and between the shaft and the Pack.
Attention: the hook must be able to pass freely. The life of the material depends on the quality of the support and the environment.
Deterioration may be increased in certain environments (snow, ice, falling rocks, etc.).
A minimum check every 12 months is required.

‍