IPACK SANGLES

<heading-style-h2>IPACK SANGLES <heading-style-h2>

<heading-style-h6>Allows you to control the cable between two decks. Avoid friction with the tree. <heading-style-h6>

<heading-style-h3>Assembly procedure <heading-style-h3>

1. Check the condition of the anchor support and the cable.
2. Proceed to install the strap on the plate and on the shaft.
The strap can be a maximum of 35mm.
Position the 12 mm lifeline cable inside the aluminum matrix using the 4 M10 bolts.
Tighten to a tightening torque of 50 Nm.

<heading-style-h3>Installation advice <heading-style-h3>

Serves to avoid friction between the cable and the shaft. The position of the IPACK must allow the hook to pass smoothly.
The lifespan of the material depends on the quality of the support and the environment.
Deterioration may be increased in certain environments (snow, ice, falling rocks, etc.).
A minimum check every 12 months is required.