CLASSIC-CLIP

<heading-style-h2>CLASSIC-CLIP <heading-style-h2>

<heading-style-h6>Protection designed to increase the longevity of C-Classic hooks. <heading-style-h6>

<heading-style-h3>Assembly procedure <heading-style-h3>

1. Present the Classic-Clip protector blank in order to identify its direction of installation and its correct positioning. The beveled part of the protector must be positioned at the back of the hook.
2. Place a trickle of Loctite™ cyanoacrylate glue on the bottom of the Classic Clip.
3. Position the Classic-Clip by ensuring pressure on the implantation area.
4. Check the correct positioning of the protector on the C.Classic hook. The ends of the Classic-Clip must fit the body of the hook perfectly.
5. Dismantling and repositioning possible. When the Classic Clip is worn out you can repeat this operation.

<heading-style-h3>Installation advice <heading-style-h3>

If you use a RUPT, an incorrect positioning of the Classic Clip during assembly will prevent the hook from passing through it. Be sure to position the Classic Clip correctly by performing blank tests.